SL-20XP® LED Flashlight w/ Charger Options Full-size yet lightweight incandescent/LED rechargeable that combines the brightness of an incandescent with the extended run time of LEDs – the best of both worlds. 8 watt halogen bulb with a 100-hour lifetime Pre-focused halogen beam of up to 28,000 Candela (peak beam intensity) 3 white LEDs with 100,000-hour lifetime provide up to 30 lumens; bulb rating is 150 lumens Lightweight, super-tough nylon polmer case with non-slip rubber comfort grip Runtime is 1.5 hours for halogen only; 40 hrs. for LEDs only; emergency backup LED (after full halogen run) = 1 hr. minimum Dual switches to select halogen or LEDs Constant-on and momentary modes High-capacity sub-C, nickel-cadmium rechargeable battery Power Failure Feature- when light is in charger in the "on" position, it will come on automatically during power failure 13.2" 1.1 lbs. Available in black, yellow or orange

Stinger LED Replacement Switch Module (Bulb) Upgrade Kit, Facecap/reflector Upgrade Kit. Facecap/reflector Assembly (Serial numbers that does not start with "C" or "C4") Includes switch assembly - Stinger LED / DS LED

Stinger® LED with C4 Flashlight ONLY Stinger® LEDThe powerful, long-range, long-running, flashlight that lasts a lifetime. A combination of rechargeability and LED technology that produces the lowest operating cost of any flashlight made! The new Stinger LED, with an ultra-bright,far-reaching beam, offers multiple lighting modes, including strobe. Now with C4® LED Technology. C4® LED technology, impervious to shock with a 50,000 hour lifetime Runtime: High brightness: Up to 1.75 continuous hours to the 10% output level; Medium brightness: Up to 3.50 continuous hours to the 10% output level; Low brightness: Up to 6.75 continuous hours to the 10% output level; Strobe: Up to 5.50 continuous hours. Up to 18,000 candela (peak beam intensity) and up to 160 lumens measured system output 3-cell, 3.6 Volt sub-C Nickelcadmium battery is rechargeable up to 1000 times Multi-function On/Off push-button switch designed for extremely long life; tested at 1 million actuations Anti-roll rubber ring included Fits existing Stinger snap-in chargers (compact and mountable in any position) 10 hr. steady charge or 2.5 hr. fast charge Deep-dish parabolic reflector produces a long range targeting beam with optimum peripheral illumination to aid in navigation Machined aircraft aluminum body with non-slip rubberized comfort grip O-ring sealed Unbreakable polycarbonate lens with scratch-resistant coating. Length: 8.41 in.; Weight: 12.4 oz Serialized for positive identification Limited lifetime warranty

Stinger Piggyback Fast Charger Stinger fast 2.5 hour Piggyback charger holder. Includes an extra battery for your stinger flashlight and will charge a flashlight and extra battery at the same time. This is the charger/holder only. Cord NOT included. The Stinger PiggyBack Charger works with Stinger, Stinger HP, Stinger XT Stinger XT HP, as well as PolyStinger. Note that this item is not compatible with the Streamlight Ultra-Stinger.

Streamlight NiCad Battery Pack for Survivor Flashlights Streamlight NiCad Battery Pack for Survivor Flashlights Genuine Streamlight Parts and Streamlight Accessories are designed specifically for your Streamlight flashlight, so you know you can trust them for quality and performance. The Survivor Division 1 Fast Charge, the Survivor Division 1 Steady Charge, the Survivor Division 2 Fast Charge and the Survivor Division 2 Steady Charge are specifically designed to operate in hazardous environments that would destroy an ordinary flashlight and are some of the most trusted flashlights in the world. BATTERY OPTIONS: Option 1 = Battery for SURVIVOR DIV 1 Option 2 = Battery for SURVIVOR DIV 2 For use with: Survivor Division 1 Fast and Steady Charge Survivor LED Division 1 Fast and Steady Charge Survivor Division 2 Fast and Steady Charge Survivor LED Division 2 Fast and Steady Charge